Assentech Sales Limited and Continental Disc Corporation bursting discs have a full line of accessories available for rupture disc (bursting disc) products. Accessories are available to enhance the rupture disc (bursting disc) assembly’s ability to work under different environments. This may include helping with installation, monitoring operation, or aiding the corrosion resistance of a holder.
Continental Disc Corporation bursting discs holders are available in a variety of types and styles to meet your needs.Please contact us for more details
-
Insert type Bursting Disc Holders
Insert type Bursting Disc Holders it between two ASME, DIN or JIS companion flanges, as shown in the photograph. Insert holders to fit other standards are available.Common features of Continental Disc Corporation’s Insert Holders include:
- Fit within companion flange bolts, allowing easy installation and removal
- Pre-assembly clips are standard and provide means to assemble the Bursting disc and holder together before installation in piping system
- Stainless steel flow direction nameplates permanently attached to the holder
- Stainless steel customer identification tag permanently attached
-
HPX-PT Pre-Torqued Holders
HPX-PT Pre-Torqued Bursting Disc Holders incorporate high strength steel socket head cap screws to ensure accurate loading and sealing of the HPX Bursting e Disc. The HPX-PT Bursting Disc holder allows the disc to be correctly fitted in the workshop using precise recommended torque levels prior to installation of the complete assembly between the flanges in the process system relief stream. Common features:
- Allows a precise torque load to be applied in the controlled environment of a workshop prior to installation
- Maintains precise loading of the rupture disc where poor flange alignment and gasket cold flow may be an issue
- Pre-torqued holder screws are protected with coating to prevent wear, sticking and galling of the screws, and provides corrosion resistance
-
MBC Multiple Bolt Sanitary Closure
The MBC Multiple Bolt Sanitary Closure is a highly durable sanitary clamping device for securing vessel and piping connections in pharmaceutical, biotechnological, food, beverage, fine chemical, and other sanitary type environments. The MBC is a multi-bolt clamp design featuring four stainless steel bolts and nuts securing a two-piece, cast stainless steel body
-
Sanitary Fitting Assembly
Continental Disc Corporation’s Sanitary Rupture Disc (Bursting Disc) Assembly is specifically suited for a wide range of process applications where product purity and corrosion resistance are required. The Sanitary Fitting Assembly is used in dairy, pharmaceutical, food processing, canning, cosmetic, chemical and many other industries.
-
Double Disc Holders
A Double Bursting Disc Holder Assembly consists of three holder components: an inlet, a mid-flange and an outlet piece, along with two rupture discs. The first of the two bursting discs is located between the inlet and the mid-flange, and the second rupture disc is between the mid-flange and outlet.
This assembly arrangement provides the solution to multiple applications without the need of a more complicated piping arrangement.
-
CLEAN-SWEEP Bursting Disc Holder
The CLEAN-SWEEP Bursting Disc Holder is designed for systems handling viscous media processes, particularly where product build-up in a piping system may cause excessive over-pressure conditions.
Assentech offer holders in a variety of types, styles and materials in order to meet your requirements. These include special threaded and welded unions as well as standard insert type holders.
Bursting discs Holders can be manufactured with a number of options for holder type, connections, materials and coatings. We work closely with CDC’s production team to offer special material and coatings in the hope of satisfying all customer requirements.
Please contact us if you would like to know more about our Bursting Discs holders
You can contact us by Phone 01726 844707 , Email : info@assentech.co.uk or using the enquiry form below
Some of our customers testimonials
Assentech- pilot operated pressure relief valves service and calibration
After conducting a Third Party Witness Inspection, I was most impressed with Ewart and his team, their professionalism, and product knowledge I found to be excellent.
Ian Johnston
Assentech- Geodesic Dome Installation
Assentech were subcontracted to assemble and install a 25m geodesic dome for Shaft G on the Lee Tunnel project. My experience with Assentech from pre-contract through to assembly has been very positive. Unlike other subcontractors I have experienced on this project, Assentech had a very positive attitude to producing the level of documentation required for a project of this scale. Leading to a high quality pre construction packaged approved in a timely manner. The communication regarding the manufacturing process was first class allowing us to easily plan our works and prepare the site. Dome assembly was carried out very efficiently and completed to programme. The task was correctly resourced and well supervised. The work force had a positive attitude and carried out the task safely. In summary from my perspective it has been a very easy subcontract to manage with a high quality finished product.
Robert Colthorpe
Assentech wins supplier excellence award from Eastman Chemicals
We were extremely pleased with the level of service and professionalism demonstrated by Assentech, right from our initial enquiry, through delivery and post installation. As a recipient of only two of these awards made by Eastman Chemical Company in the UK, based on performance in 2014, Assentech are rightly proud of their achievements.
Assentecha-IFR Installations at Vopak, Teesside
As you said “you delivered what it said on the tin”. On time and on budget. Your up front engineering to determine the suitability of your product for our application was second to none, i have not seen anyone else in the industry pay as much attention to detail before you get the purchase order number as Assentech.
Garry Lee
Assentech-IFR Installations at Navigator Terminals
Assentech have supported our Navigator Terminal (formerly known as Vopak Teesside) on two important ~
projects by providing technical assistance and supplying and fitting a total of 11 Internal floating roofs. Both projects have been completed on schedule and on budget. Assentech have provided an excellent level of experience and front end engineering support with high quality drawings and documentation. Their specialist on site labour have worked collaboratively with us and Assentech have proven to be open, honest and flexible partners.
We have experience of both their Heavy Duty Pontoon type and Full Contact IFR’s and we continually monitor operation and performance of all lFR units Installed on site and consider the Assentech supplied Matrix brandto be the best in the market with exceptional build quality and rigidity. Our clients have inspected the installations and have always remarked upon the build quality and have been impressed with their strength in fully supporting up to four people without noticeable deformation. The design and construction of their stainless steel shoe seals continue to prove to operate excellently with no noticeable reduction in performance or flotation ability over the time since Installation.
Assentsch have proven to be extremely competitive on price and their installation and inspection activities have always been thorough. Navigator therefore have no hesitation in recommending Assentech to other companies considering their services.
Brian Beddow
